顶板瓦斯高抽巷合理抽放负压数值模拟研究

顶板瓦斯高抽巷的抽采效果与抽放负压直接相关.结合阳煤三矿K8206大采长综放 面顶板瓦斯高抽巷实际抽采效果,通过数值模拟与现场实测数据分析,得出顶板瓦斯高抽巷 抽采正常期最优抽放负压,以期对高瓦斯矿区顶板瓦斯高抽巷的合理抽放参数确定提供科学依据,实现矿井的煤与瓦斯安全高效共采.     

计算流体动力学在模拟气升式环流反应器中的研究进展

计算流体动力学(CFD)是对气升式环流反应器进行数值模拟的重要手段.为此,本文综述了CFD模拟概况及气升环流反应器中流体数值模拟研究进展,总结了目前CFD模拟气升环流反应器存在的问题,并提出了进一步的研究方向.     

碳纳米管在环境样品前处理中的研究现状及应用进展

纳米碳管是一种新型的纳米材料,其独特的分子结构和性能引起了人们的广泛关注。本文重点评述了纳米碳管在环境样品前处理特别是在固相萃取和固相微萃取方面的研究现状与应用进展,并对纳米碳管的应用前景进行了展望。     

Characterization of MSWI fly ash through mineralogy and water extraction

This paper investigates the mineralogical characteristics of fresh, aged and hot water extracted MSWI fly ash for providing the baseline information of minerals stability which controls the released heavy metals into the environment. Quantitative determination of bulk phase abundance in the fresh fly ash by the XRD Rietveld refinement method provided composition levels for amorphous and crystalline phases such as potassium tetrachlorozincate (K₂ZnCl₄), gehlenite, halite, quartz, anhydrite, and feldspar. The minerals association in the fly ash is clearly unstable and subject to mineralogical reactions. The phases of K₂ZnCl₄, halite and anhydrite in the fresh fly ash were involved in hydration and dissolution/precipitation processes to form new minerals such as the Zn-bearing mineral gordaite, syngenite, gypsum and hydrocalumite. The solubility-controlling phases and extractability of heavy metals were examined in a Soxhlet hot water-extractor. Here the soluble salts were simply removed from fly ash while Ca-, Al-, Si- and SO₄²⁻-bearing hydrate minerals were precipitated from the extraction solution. Furthermore, a low release of heavy metals Zn, Pb and Cd in hot water was noticed, indicating a strong retention of the trace metals in the mineral phases remaining in the insoluble fly ash residues.     

钻井废液的固液分离工艺与设备

影响钻井废液固液分离的因素包括钻井废液的稀释比例、脱稳处理药剂的种类和加量、固液分离设备。文章介绍了钻井废液处理的基本流程,分析了钻井废液pH值对固液分离效果的影响,论述了卧式螺旋卸料沉降离心机的基本结构、设备参数和操作参数对固液分离效果的影响。     

Simulation studies of ammonia removal from water in a membrane contactor under liquid–liquid extraction mode

Simulation studies were carried out, in an unsteady state, for the removal of ammonia from water via a membrane contactor. The contactor had an aqueous solution of NH₃ in the lumen and sulphuric acid in the shell side. The model equations were developed considering radial and axial diffusion and convection in the lumen. The partial differential equations were converted by the finite difference technique into a series of stiff ordinary differential equations w.r.t. time and solved using MATLAB. Excellent agreement was observed between the simulation results and experimental data (from the literature) for a contactor of 75 fibres. Excellent agreement was also observed between the simulation results and laboratory-generated data from a contactor containing 10,200 fibres. Our model is more suitable than the plug-flow model for designing the operation of the membrane contactor. The plug-flow model over-predicts the fractional removal of ammonia and was observed to be limited when designing longer contactors.     

多晶硅切割液废液的回收与利用

结合工程实际,介绍了太阳能产业用多晶硅片切割过程中产生的割液废液的处理工艺及回收工艺,并分析了它的投资成本和经济效益。     

加速溶剂萃取-固相萃取净化-高效液相色谱法测定玉米作物中多环芳烃含量

建立了加速溶剂萃取-固相萃取净化-高效液相色谱测定玉米作物中15种多环芳烃的方法,优化了试验条件.方法线性关系良好,15种多环芳烃的检出限在0.003 8～0.079μg/kg之间,空白加标试验的相对标准偏差在3.9%～11.7%之间,基质加标回收率在69.3%～115.3%之间.实际样品的测定结果表明,该方法分离效果...     

水和废水中阴离子表面活性剂测定干扰因素试验研究

对二氮杂菲萃取分光光度法测定水和废水中阴离子表面活性剂的主要干扰因素进行了试验研究.设计了温度过低、浑浊带色和混溶乳化3种干扰试验方案,探讨了各干扰因素在不同工况下的试验结果、影响程度及消除措施.提出温度过低须在测定前提高环境温度,以确保显色反应完全;浑浊带色须在测定中采用色(浊)度校正法消除干扰;混溶乳化可在测定中利...     

铅锌冶炼废水处理后沉渣重金属元素特征与环境活性研究

通过扫描电子显微镜与X射线衍射仪分析、BCR法三步连续提取及元素化学分析,对铅锌冶炼废水处理后沉渣中重金属的赋存状态、环境活性进行研究。结果表明,沉渣中主要毒害元素为Zn、Pb、Mn、Cd和Cu,且以非晶态存在,其含量分别为62350、29530、7650、4530和830 mg/kg。渣中Zn和Cd酸可提取态所占比例较大,分别为37.72%和34.44%; Mn的可还原态相对含量很高,达到49.67%;Zn和Pb的可氧化态含量较高,分别占全量的34.16%、34.68%;Pb和Cu的残渣态含量较高,分别占全量的39.72%和61.69%。